ROM GURUS

Download all Gionee Factory Stock ROM firmware.
To download and learn how to use SP Flash Tools to un-brick or upgrade your phone, click here 

To download and learn how to create scatter file and ROM Backup using MTK Droid Tools click here
Get all Gionee tools from here

1. Gionee D1
2. Gionee E3 Ginger Bread
3. Gionee E3 Kitkat
4. Gionee E5
5. Gionee E6
6. Gionee E7 Mini
7. Gionee Elief E7 16GB
8. Gionee Elief E7 32GB
9. Gionee G1
10. Gionee G2
11. Gionee G3 1G RAM
12. Gionee G3 512 RAM
13. Gionee G3 8G ROM
14. Gionee G4
15. Gionee G5
16. Gionee L700
17. Gionee L800 
18. Gionee M2 4GB
19. Gionee M2 8GB
20. Gionee M3 Ginger Bread
21. Gionee M3 Kitkat
22. Gionee M3 Lollipop
23. Gionee M5 Lite
24. Gionee_M5_BBL7313GI 
25. Gionee_M5_T6184 
26. Gionee P1 OS 2.3
27. Gionee P1
28. Gionee P2 OS 4.2
29. Gionee P2S OS 4.2
30. Gionee P2 New
31. Gionee P3 Ginger Bread
32. Gionee P3 Kitkat
33. Gionee P4S OS 4.4.2
34. Gionee P4 Ginger Bread
35. Gionee P4 OS 4.4.2
36. Gionee P4 Kitkat
37. Gionee P5.1 OS 4.4.2 
38. Gionee P6 OS 5.0
39. Gionee S Plus 0204-T6075 
40. Gionee S Plus 0204-T6006
41. Gionee S5.5 
42. Gionee S7
43. Gionee S80 
44. Gionee S90
45. Gionee S96
46. Gionee T520 
47. Gionee V1
48. Gionee V2
49. Gionee V3
50. Gionee V4
51. Gionee V4S
52. Gionee V5
53. Gionee V6L

This procedure is the same for all MTK based Android phones (e.g Tecno, Gionee, Infinix, TLC, Opsson, Innjoo, Lead1 etc )

# See the video tutorial below or @ http://youtu.be/AJLgSD9zHb8





Tools needed

* A working MTK phone
* Download PdaNet
* Download MTK Droid tools
* PC
* USB Cord
* Enough space  (at least 4GB) on the SD card / phone Storare (to avoid the insufficient strorage space error)

Note

* If you get an error saying "Error: file adbd not install" then read https://forum.hovatek.com/thread-1219.html to fix it
* If you get an error saying "insufficient space on device" then ensure there's at least 4GB free space on both phone storage and SD card (if supported) then install Busybox on the phone
* If you get an error like "Preparation of files for FlashTool is impossible, file isn't found" then remove all scatter files in the backup folder except one and rename this last one to MT65??_Android_scatter ( where "??" represents the number for your phone model e.g MT6572_Android_scatter)
* If you get an error like "ERROR: Zero file, no space left on device!" then read https://forum.hovatek.com/thread-6407.html
* If you get -- ERROR : --- TotalBytesPerChunk Not Found. Set default Page/Spare=2048/64 !!! then slot in an SD card into the phone and install Busybox on the phone.

Procedure

* Enable USB debugging on the good MTK phone (Settings > Developer > Tick USB Debugging) then connect it to PC. If you don't find Developer under Settings then go to Settings > About > Keep taping Build Number
* Install PdaNet on the PC with the USB debugging enabled working MTK phone still connected (Select Other from the list of devices during installation)
* At the end of PdaNet installation, you should get a "drivers successfully installed" message
* Exit PdaNet in system tray (bottom right corner of PC)
* Launch MTK droid tools as Administrator (right-click > run as Administrator) still with the working MTK phone connected to PC
* MTK droid tools should detect and display the phones details by the left along with a yellow box at the bottom
* Click ROOT at the bottom of MTK and select Yes/OK if prompted on PC and Grant if prompted on phone
* A progress bar should load at the bottom shortly after which the yellow box should become green
* Click on the root,backup,recovery tab at the top
* Click Backup (MTK should keep writing some things by the right hand side during backup) and wait till backup is complete
* If you get a prompt to pack backup, select No.
* Once backup is complete, don't close MTK droid tools
* Go to the MTK droid tools folder > Backups > Folder named after the phone's model e.g Tecno_m3_backup.... and take note of this folder as the 'Backup folder' because we'll be referring to it soon
* Go back to MTK droid tools and click 'To prepare blocks for Flash Tool'
* A window will open, in this window, navigate to the Backup folder (mentioned above) and select the md5 file
* MTK will start copying some items (check the right hand side) so wait till copying is complete
* Once copying is complete, open the Backup folder and you should see a folder named "!Files to flash"
* The !files to flash folder is a selection of files needed to use Sp Flash tool, keep it well
* Both the !files to flash folder and the x_backup folder (which contains the !files to flash folder) are your phone's MTK backup
* If you need an MTK Droid tools backup of usrdata and cache then use MTK Droid Tools version 2.3.0 or do a read back using Sp flash tool (see https://forum.hovatek.com/thread-526.html ) - See more at: https://forum.hovatek.com/thread-468.html#sthash.S6wsocNU.dpuf

Have you damage your handheld device software? Do you want to fix it and don`t know how? This simple and effective method will teach you how to unbrick android phones using Sp-flash tools

How to manually install MT65xx (MediaTek) USB VCOM drivers on Windows - See more at: https://forum.hovatek.com/thread-440.html#sthash.5Md8TUUb.dpuf

Requirement

1. Download MediaTek USB VCOM drivers
2. Download USB Deview ( 32 bit here : 64 bit here )

Note: 
* You might need to disable drivers signature verification in Windows for this to work smoothly.  see  http://forum.hovatek.com/thread-752.html for the procedure

* If you have access to a working phone of the same model then remove the battery from the working phone and connect to PC via USB cord. Mediatek preloader VCOM drivers should be automatically installed so you can skip the rest of this guide

Procedure

# See the video tutorial below or @ http://youtu.be/sADkzyI8Z5Q





1. Install USBDeview and use it to uninstall all Vcom, Mediatek and Preloader drivers
1b. Extract the contents of the Mediatek USB VCOM file above ( The Password when extracting is Hovatek )
2. In Windows, go to Control Panel and open Device Manager
3. Click any of the device groups (any of the items on the list) you see there, then from Action menu, select Add legacy hardware
4. Add hardware wizard will be opened, click next
5. Select Install the hardware that I manually select from a list (Advanced)
6. Click next two times and click Have Disk button
7. Click browse and find where your driver's .inf file is, then select it (the .inf you'll select is located in drivers > USB Vcom driver > your OS) . Ensure to select the 64 bit .inf if your PC is 64 bit
8. Click Open and OK. You will see the drivers listed.
9. Select your driver there (select Mediatek Preloader USB VCOM Port)
10. Click Next and finish installing
11. If SP flash tool or other software still dont detect your phone then also install Mediatek DA VCOM (consider installing more from the list of drivers one at a time if need be  )
12. If you get the code 10 error after the installation, simply ignore it and proceed with SP flash tool. You're only getting that error because the driver is not digitally signed.
- See more at: https://forum.hovatek.com/thread-440.html#sthash.5Md8TUUb.dpuf

Requirement

1. Download MediaTek USB VCOM drivers
2. Download USB Deview ( 32 bit here : 64 bit here )

Note: 
* You might need to disable drivers signature verification in Windows for this to work smoothly.  see  http://forum.hovatek.com/thread-752.html for the procedure

* If you have access to a working phone of the same model then remove the battery from the working phone and connect to PC via USB cord. Mediatek preloader VCOM drivers should be automatically installed so you can skip the rest of this guide

Procedure

# See the video tutorial below or @ http://youtu.be/sADkzyI8Z5Q





1. Install USBDeview and use it to uninstall all Vcom, Mediatek and Preloader drivers
1b. Extract the contents of the Mediatek USB VCOM file above ( The Password when extracting is Hovatek )
2. In Windows, go to Control Panel and open Device Manager
3. Click any of the device groups (any of the items on the list) you see there, then from Action menu, select Add legacy hardware
4. Add hardware wizard will be opened, click next
5. Select Install the hardware that I manually select from a list (Advanced)
6. Click next two times and click Have Disk button
7. Click browse and find where your driver's .inf file is, then select it (the .inf you'll select is located in drivers > USB Vcom driver > your OS) . Ensure to select the 64 bit .inf if your PC is 64 bit
8. Click Open and OK. You will see the drivers listed.
9. Select your driver there (select Mediatek Preloader USB VCOM Port)
10. Click Next and finish installing
11. If SP flash tool or other software still dont detect your phone then also install Mediatek DA VCOM (consider installing more from the list of drivers one at a time if need be  )
12. If you get the code 10 error after the installation, simply ignore it and proceed with SP flash tool. You're only getting that error because the driver is not digitally signed.
- See more at: https://forum.hovatek.com/thread-440.html#sthash.5Md8TUUb.dpuf

Requirement

1. Download MediaTek USB VCOM drivers
2. Download USB Deview ( 32 bit here : 64 bit here )

Note: 
* You might need to disable drivers signature verification in Windows for this to work smoothly.  see  http://forum.hovatek.com/thread-752.html for the procedure

* If you have access to a working phone of the same model then remove the battery from the working phone and connect to PC via USB cord. Mediatek preloader VCOM drivers should be automatically installed so you can skip the rest of this guide

Procedure

# See the video tutorial below or @ http://youtu.be/sADkzyI8Z5Q





1. Install USBDeview and use it to uninstall all Vcom, Mediatek and Preloader drivers
1b. Extract the contents of the Mediatek USB VCOM file above ( The Password when extracting is Hovatek )
2. In Windows, go to Control Panel and open Device Manager
3. Click any of the device groups (any of the items on the list) you see there, then from Action menu, select Add legacy hardware
4. Add hardware wizard will be opened, click next
5. Select Install the hardware that I manually select from a list (Advanced)
6. Click next two times and click Have Disk button
7. Click browse and find where your driver's .inf file is, then select it (the .inf you'll select is located in drivers > USB Vcom driver > your OS) . Ensure to select the 64 bit .inf if your PC is 64 bit
8. Click Open and OK. You will see the drivers listed.
9. Select your driver there (select Mediatek Preloader USB VCOM Port)
10. Click Next and finish installing
11. If SP flash tool or other software still dont detect your phone then also install Mediatek DA VCOM (consider installing more from the list of drivers one at a time if need be  )
12. If you get the code 10 error after the installation, simply ignore it and proceed with SP flash tool. You're only getting that error because the driver is not digitally signed.
- See more at: https://forum.hovatek.com/thread-440.html#sthash.5Md8TUUb.dpuf

Requirement

1. Download MediaTek USB VCOM drivers
2. Download USB Deview ( 32 bit here : 64 bit here )

Note: 
* You might need to disable drivers signature verification in Windows for this to work smoothly.  see  http://forum.hovatek.com/thread-752.html for the procedure

* If you have access to a working phone of the same model then remove the battery from the working phone and connect to PC via USB cord. Mediatek preloader VCOM drivers should be automatically installed so you can skip the rest of this guide

Procedure

# See the video tutorial below or @ http://youtu.be/sADkzyI8Z5Q





1. Install USBDeview and use it to uninstall all Vcom, Mediatek and Preloader drivers
1b. Extract the contents of the Mediatek USB VCOM file above ( The Password when extracting is Hovatek )
2. In Windows, go to Control Panel and open Device Manager
3. Click any of the device groups (any of the items on the list) you see there, then from Action menu, select Add legacy hardware
4. Add hardware wizard will be opened, click next
5. Select Install the hardware that I manually select from a list (Advanced)
6. Click next two times and click Have Disk button
7. Click browse and find where your driver's .inf file is, then select it (the .inf you'll select is located in drivers > USB Vcom driver > your OS) . Ensure to select the 64 bit .inf if your PC is 64 bit
8. Click Open and OK. You will see the drivers listed.
9. Select your driver there (select Mediatek Preloader USB VCOM Port)
10. Click Next and finish installing
11. If SP flash tool or other software still dont detect your phone then also install Mediatek DA VCOM (consider installing more from the list of drivers one at a time if need be  )
12. If you get the code 10 error after the installation, simply ignore it and proceed with SP flash tool. You're only getting that error because the driver is not digitally signed.
- See more at: https://forum.hovatek.com/thread-440.html#sthash.5Md8TUUb.dpuf